Batch System v. Automated Line: Tips to Choose the Right Powder Coating System

Reliant Finishing Systems is sharing its powder coating expertise to help business owners and production managers determine if an automated or manual powder coating system will best suit their needs.

The powder coating experts at Reliant Finishing Systems have years of experience manufacturing and installing powder coating equipment. One of the most common questions they get asked is whether to use a manual batch-type system or an automated line. Batch systems and automated lines use different approaches to powder coating, each with their own advantages. Reliant recently began distributing comparison guidelines to help businesspeople choose between the two types of systems.

For those unfamiliar with the terms, an “automated system” (or automated line) is a powder coating system that moves parts automatically through the various steps of the powder coating process. These steps usually include using a chemical wash to prepare the surface of the parts, drying the parts, applying the powder coating media, curing the powder coated finish onto the parts, then allowing them to cool.  The parts typically move in one direction from device to device and these all of these tasks are done to different parts at the same time. A “batch system” allows the operator to manually prepare and accumulate parts, then coat and cure the parts in batches. The parts are typically moved from one device to another by hand using carts.

These are some of Reliant’s most useful tips for deciding whether a batch or automated system best suits a coater’s needs:

Consider the volume of work and the nature of the parts being coated. If you’re dealing with thousands of similarly sized parts per shift, an automated system is probably your best bet. The more varied the shape and size of the parts, the less advantage an automated system typically offers. A batch system provides significant benefits in terms of equipment cost and workflow versatility, but relies on workers to move parts, prep parts and apply powder coating media. So, if the volume of parts is quite large, the advantages of a batch system are lost.

Determine how quickly you’ll need parts to be powder coated. If the coating process outpaces the manufacturing process, a batch system is ideal. If the powder coating process delays output, an automated system may help. You can coat large quantities of similar items quickly since parts don’t have to be handled between stages. If the automated line is designed for rapid throughput, a constant flow of parts can be coated at a rate that usually can’t be matched by manual techniques.

Evaluate floor space. Batch systems generally take up less room, so they’re better for businesses that can’t spare extra space. Batch systems sometimes use one oven to do the work of both drying and curing parts, which further reduces cost and saves on floor space. By using ovens where the parts move back and forth multiple times inside relatively short but wide enclosures, some automated lines fit into surprisingly tight spaces. But, most automated lines involve restricted access to at least some key components, especially in cramped spaces. This drives maintenance and repair costs up.

Budget is always a primary consideration. Batch systems are significantly cheaper than comparable automated lines, usually costing less than half as much, so if your budget is tight it might be best to start with a batch system. Batch equipment requires more manpower, but also tends to have lower maintenance costs. Batch systems can also provide lower operating costs because you only use equipment as it is needed. With automated systems there is almost always a constant process of coating taking place, so relative operating costs can increase if the system isn’t being used to full capacity. No matter what type of system is used, Reliant advises coaters to have a plan for growth and size their equipment accordingly

Reliant Finishing Systems is devoted to making sure every client gets dependable, fairly priced equipment that perfectly suits his or her needs. For additional powder coating information, visit WhatisPowderCoating.com.

About Reliant Finishing Systems

Reliant Finishing Systems is the fastest growing powder coating equipment manufacturer in North America. Based in Somerville, Alabama, Reliant designs and manufactures automated finishing lines for industrial use, as well as popular "batch" coating systems, curing ovens, powder spray booths, media blast rooms and custom-manufactured finishing equipment for powder coating operations of all sizes.