News
Deadly Mold & Bacteria Linked to Unclean “Clean Rooms” – What Can Be Done?
A regular quarterly qualitative and quantitative environmental cleanroom monitoring including culturable microbiological levels, adenosine triphosphate (ATP) levels, HVAC system cleanliness and hygiene conditions/levels, HEPA filtration efficacy, temperature and relative humidity conditions and particulate types is recommended
Washington DC -- The deadly meningitis outbreak that has been linked to contaminated pain medicine (steroids) was tied to mold and bacteria growing in the supposed “sterile” rooms. These conditions have prompted calls for tighter federal regulation of compounding pharmacies, which have periodically been blamed for crippling and sometimes fatal injuries. In the past, Congress has pushed for more authority over the industry. During the 1990s, compounding pharmacies fought overlapping laws, contradictory court rulings and overall uncertainty about how much power the Food and Drug Administration (FDA) has to regulate compounders.
Upon investigation by the FDA of the New England Compounding Pharmacy Inc., (which was linked to the fungal meningitis infection cases that has now killed 25 people) they found greenish yellow and tarnished discolorations on equipment and in areas where the steroid medicine was mixed. Supposedly, mold and bacteria were found to have exceeded limits the pharmacy set itself. The FDA stated in a preliminary report that cites company documents that “no documented corrective actions were taken to remove the microbial contamination.”
What is a Compounding Pharmacy?
Compounding pharmacies prepare medications in what are called Class 10 to 100K clean rooms, which are supposed to be temperature-controlled, HEPA air-filtered to maintain sterility and monitored for mold and bacteria routinely and an outside AIHA accredited microbiology lab providing the analytical lab results. Compounding pharmacies are used for voluntary reasons, such as adding favorite flavors to a medication or modifications to prescriptions for dose preparation. More recently it has been suggested that some doctors and clinics have turned away from major drug manufacturers and turned to compounding pharmacies because they often charge much lower prices than the major manufacturers.
Microbiology expert Dr Rajiv Sahay, FIAS, Laboratory Director of Environmental Diagnostics laboratory (EDLab) stated “many of the compounding pharmacies that we assess do provide diligent proactive environmental management of the their Class 1 to Class 100K Clean Rooms which provides their clients the surety that the medicines are being made and handled under strict sterile conditions though due to the unregulated conditions there are those compounding pharmacies that lack the effective Clean Rooms environmental strategies necessary to make drugs in sterile conditions.”
What is a Clean Room?
A cleanroom is an environment, typically used in the manufacturing/compounding of drugs or other scientific research that is required to maintain a low level of environmental pollutants/contaminants e.g. dust, airborne and surface mold and bacteria, non viable particles and potential chemical vapors. More specifically, a cleanroom has a controlled level of contamination that is specified by the number of particles per cubic meter at a specified particle size and a certain level of colony forming units of mold and bacteria per cubic meter or per contact plate for surfaces. Clean rooms are covered under the US Federal Standard 209E. An example: in a Class 100 Cleanroom (ISO 5/USP 797 Compliance) any cubic foot of air in the Cleanroom should have no more than 100 particles per cubic foot floating around in it larger than 0.05 microns and less than 3 colony forming units (CFU) per cubic meter in the air (or less than 0.1 cubic feet of air).
What can be done to minimize microbial contamination?
A regular quarterly qualitative and quantitative environmental cleanroom monitoring including culturable microbiological levels, adenosine triphosphate (ATP) levels, HVAC system cleanliness and hygiene conditions/levels, HEPA filtration efficacy, temperature and relative humidity conditions and particulate types is recommended in order to assess and control effective cleanliness of cleanrooms.
The Environmental Diagnostics Laboratory (EDLab) at Pure Air Control Services a leader in USP 797/Cleanrooms performs a wide array of microorganisms (bacteria and fungi) including organisms such as Aspergillus sp, Exserohilum sp., Staphylococcus aureus, Legionella pneumophila, ect… EDLab scientists identify microorganisms by using various modern lab techniques. Some common analysis performed by EDLab to identify microbial conditions include Bio-Scan and Spore Trap analysis, mycological culturable analysis of air/bulk/surface/swab/liquid environmental samples among many others. The type of sampling and analysis performed is determined by project specifications project requirements or individual needs.
For additional information on Clean Room efficacy or Building IAQ surveys you can contact Dr. Rajiv Sahay, Director, EDLab, at Pure Air Control Services, www.pureaircontrols.com 1-800-422-7873 ext 303.
About Pure Air Control Services, Inc.
More News
IAQ Test Kits (DIY), PURE-Steam Coil Cleaning and PURE-Decon Room Treatment Showcased at the Annual FRACCA Conference
This annual event provides an opportunity for licensed contractors throughout the State of Florida to obtain all 14 state-required hours of continuing education over the course of the two-day event.
Released On: 3/8/2014
Views: 4257
Free Legionella Webinar: Detection & Identification Workshop
Although this type of bacteria was around before1976, more illness from Legionnaires' disease is being detected now. Due to consumer awareness, added research and technological advances in healthcare Legionnaires disease identification is becomi ...
Released On: 3/4/2014
Views: 4094
Why Some High-Performance Buildings Are Failing?
Performance of a building depends on its structured integrity, preventive maintenance, as well as periodical monitoring of the environmental conditions essential for its functionality.
Released On: 2/19/2014
Views: 4123
Legionnaire’s – What You Should Know About The Potential Deadly Bacteria
According to Building Operating Management magazine, expert Victor Yu, MD, Professor of Medicine, University of Pittsburgh; Chief, Infectious Disease Section, VA Medical Center, Pittsburgh, PA, disclosed that “Up to 70% of all buildings greater t ...
Released On: 2/18/2014
Views: 3675
Managing of Indoor Environments: Problems and Solutions - IEQ WEBINAR
Released On: 1/22/2014
Views: 3571
Save Energy and Improve Indoor Air Quality (IAQ) with PURE-Steam Deep Coil Cleaning
High efficiency coils are extremely susceptible to blockage from dust accumulation because once lodged deeply within the fins bacteria and mold may initiate growth, which not only compounds the blockage problems but also gives rise to excessive o ...
Released On: 1/8/2014
Views: 6354
January is National Radon Action Month
Exposure to radon is the second leading cause of lung cancer after smoking. Radon is an odorless, tasteless and invisible gas produced by the decay of naturally occurring uranium in soil and water.
Released On: 1/8/2014
Views: 4020
Why indoor air quality is important to all of us?
World Health Organization (WHO Guidelines for Indoor Air Quality, 2009) concluded that the most important effect is increased prevalence of respiratory symptoms, allergies and asthma, as well as perturbation of the immunological systems
Released On: 12/31/2013
Views: 4054
Pure Air Control Services Launches New Interactive Website
The website is a true indoor environmental resource for the private and public sector including consumers, educational facilities e.g. schools, universities, along with city, county state and federal governments, healthcare and the public sector.
Released On: 12/20/2013
Views: 3078
Pure Air Control Services Awarded Certification from Doctor Trusted
“We are very proud to have been given the opportunity to display that we are a Doctor Trusted recipient. We will continue as always to help provide our customers with a great products and services,” stated Dr. Rajiv Sahay, environmental analytica ...
Released On: 12/11/2013
Views: 4008
IndoorAirTest.com Receives Seal of Approval by Doctor Trusted
IndoorAirtest.com is very proud to have a Doctor Trusted seal of approval displayed on our website, giving our customers more confidence when shopping with us.
Released On: 12/4/2013
Views: 4432
PURE-Decon/Sanosil, Reduces Sick Days Caused by Infection
Released On: 10/2/2013
Views: 3363
Controlling Asthma & Allergy Triggers Through Source Identification
The assessment of allergens in a house dust sample is an essential step for allergen-avoidance and provides information essential for allergen-reducing measures, in addition to managing the indoor environment from a health and hygiene point of view
Released On: 9/18/2013
Views: 5448
Hospitals Get a “Clean Bill of Health” with Innovative IAQ/Energy Solutions
Healthcare-associated infections (HAIs) are infections that patients acquire during the course of receiving healthcare treatment for other conditions.
Released On: 7/31/2013
Views: 4486
How Safe is Formaldehyde in our Buildings and Homes?
Released On: 7/17/2013
Views: 4730
Commercial Energy Solutions Seminar July 26, 2013
Released On: 7/11/2013
Views: 4804
Health Risks Associated With Indoor Microbes
Some common and frequently reported microbes of the indoor environment include, but are not limited to, viruses, bacteria, mycoplasma, mold (fungi), yeast, protozoa, etc.
Released On: 6/26/2013
Views: 5979
Aspergillosis: A Cause for Indoor Concerns?
In indoor environments, this fungus can be transported from outside or may propagate on building materials such as cellulose rich sheet rocks, etc. and can generally be isolated from floors, carpets, mattress dust, Heating Ventilation Air Conditi ...
Released On: 6/19/2013
Views: 10544
Map
Pure Air Control, Services, Inc.
Get DirectionsPure Air Control, Services, Inc.
-
4911 Creekside Drive
Clearwater, Florida 33760
United States - 1 (800) 422-7873
