The burgeoning Mississippi River has rumbled into the Mississippi Delta on Tuesday, threatening to wash away large homes and shacks, destroy cotton, rice and corn fields in a flood of historic proportions. The storm soaked the southern states pushing rivers over their banks, closing roads and schools, and requiring thousands of people to evacuate.
The river crested before daybreak at Memphis, Tenn., just inches short of the record set in 1937.
With the flood waters continuing to cascade down the Mississippi River, expanding its normal horizons, we don’t know final extent of flooding though what we do know is that flood waters can have catastrophic effects on the health and safety of both residents and business owners in the regions.
Pollution and Health Risks from Flood Waters:
Floodwaters potentially increase the risk of air, surface and water pollution. The stagnant water from flooding is a reservoir for microbes and other chemicals (VOC and other gases) as it contains sewage and other debris.
Bacterial and fungi/mold infections are very common in this situation and the contaminated environment carries potential high health risks for diseases/epidemics.
Dangerous toxins can be found in flood waters are a significant health problem for area residents in the flooded portions the Mississippi River.
Standing water is a breeding ground for bacteria, viruses and mold, which can become airborne and put people at risk for lung disease and other respiratory problems. Contaminants in the flood waters can pose additional threats that last long after the waters recede.
Contaminants, bacteria, viruses and mold pose risks even after the waters recede. Children, seniors and people with lung diseases like asthma and COPD are at a higher risk of developing breathing problems from these contaminants.
The American Lung Association cautions Tennessee residents that dampness, and not just standing water, gives rise to mold and mildew.
Floods can bring into your home a toxic mix of contaminants that can include sewage, pesticides, and chemicals. The most important part of the cleanup process is removing all the water, including the hidden dampness that can remain in indoor areas to prevent the growth of mold.
Damaged materials and furnishings should be discarded, including any items that cannot be thoroughly cleaned and dried within 24-48 hours. Simply drying out water will not remove the contaminants or toxins that can make people sick. Furniture and other personal belongings covered by water should be discarded to prevent mold growth.
The resident/property owner should avoid direct contact with standing water when possible to minimize the chance for infection. It is also important to have information available on the potential chemical and biological contaminants for managing the risk of health and hygiene.
Environmental Sampling and Risk Assessment:
It is essential to know the nature and type of pollutants in order to evaluate the associated risk of a flood-damaged area. EDLab recommends The IAQ Test Kit Center online at www.indoorairtest.com for Do-It-Yourself (DIY) test kits for testing allergens, bacteria, mold, volatile organic compounds (VOC), or flood victims may take advantage of our special program, Building Health Check, for assessing the building condition after the flood. The Building Health Check (BHC) hotline 800-422-7873 is open and a BHC IAQ specialist is ready to help.
Flood victims may also purchase Do-It-Yourself test kits and other sampling supplies available by calling Cy Garner at 1-800-422-7873, Ext. 804 or ext 404.
SPECIAL DISCOUNT: EDLab offers a 10% discount off the list price on all their services. This offer is valid June 30, 2011 for flood-affected areas of the south.
*******************************************
About Pure Air Control Services:
Founded in 1984 by Alan Wozniak, President/CEO in what began as a small mechanical contracting business has grown into an award winning, industry leading indoor air quality (IAQ) service company serving many fortune 500 corporations, school boards, county, city, state and federal governments and consumers across the US. The firm has serviced over 600 million square feet of indoor environments in over 10,000 facilities.
Pure Air’s nationally performed services include: Building Sciences Evaluation; Building Health Check; an AIHA accredited Environmental Microbiology Laboratory; Environmental Project Management; and Duct Cleaning & Mold Remediation Services, among other indoor environmental services. The company’s expanding client roster includes the General Services Administration (GSA); Federal Aviation Administration (FAA), Allstate Insurance; Carrier Air Conditioning; Naval Air Warfare Center, Orlando; and Naval Air Station - King's Bay, Georgia, and many other Fortune 500 companies, school boards, and city, state, and county governments, making Pure Air a reliable industry leader.
For more information, visit the company’s web site at www.pureaircontrols.com or contact Dr. Rajiv Sahay or Alan Wozniak at 1-800-422-PURE (7873) ext 301 or 802.
###
This annual event provides an opportunity for licensed contractors throughout the State of Florida to obtain all 14 state-required hours of continuing education over the course of the two-day event.
Released On: 3/8/2014
Views: 4251
Although this type of bacteria was around before1976, more illness from Legionnaires' disease is being detected now. Due to consumer awareness, added research and technological advances in healthcare Legionnaires disease identification is becomi ...
Released On: 3/4/2014
Views: 4088
Performance of a building depends on its structured integrity, preventive maintenance, as well as periodical monitoring of the environmental conditions essential for its functionality.
Released On: 2/19/2014
Views: 4113
According to Building Operating Management magazine, expert Victor Yu, MD, Professor of Medicine, University of Pittsburgh; Chief, Infectious Disease Section, VA Medical Center, Pittsburgh, PA, disclosed that “Up to 70% of all buildings greater t ...
Released On: 2/18/2014
Views: 3669
Released On: 1/22/2014
Views: 3559
High efficiency coils are extremely susceptible to blockage from dust accumulation because once lodged deeply within the fins bacteria and mold may initiate growth, which not only compounds the blockage problems but also gives rise to excessive o ...
Released On: 1/8/2014
Views: 6347
Exposure to radon is the second leading cause of lung cancer after smoking. Radon is an odorless, tasteless and invisible gas produced by the decay of naturally occurring uranium in soil and water.
Released On: 1/8/2014
Views: 4012
World Health Organization (WHO Guidelines for Indoor Air Quality, 2009) concluded that the most important effect is increased prevalence of respiratory symptoms, allergies and asthma, as well as perturbation of the immunological systems
Released On: 12/31/2013
Views: 4042
The website is a true indoor environmental resource for the private and public sector including consumers, educational facilities e.g. schools, universities, along with city, county state and federal governments, healthcare and the public sector.
Released On: 12/20/2013
Views: 3067
“We are very proud to have been given the opportunity to display that we are a Doctor Trusted recipient. We will continue as always to help provide our customers with a great products and services,” stated Dr. Rajiv Sahay, environmental analytica ...
Released On: 12/11/2013
Views: 3997
IndoorAirtest.com is very proud to have a Doctor Trusted seal of approval displayed on our website, giving our customers more confidence when shopping with us.
Released On: 12/4/2013
Views: 4421
Released On: 10/2/2013
Views: 3355
The assessment of allergens in a house dust sample is an essential step for allergen-avoidance and provides information essential for allergen-reducing measures, in addition to managing the indoor environment from a health and hygiene point of view
Released On: 9/18/2013
Views: 5442
Healthcare-associated infections (HAIs) are infections that patients acquire during the course of receiving healthcare treatment for other conditions.
Released On: 7/31/2013
Views: 4479
Released On: 7/17/2013
Views: 4721
Released On: 7/11/2013
Views: 4790
Some common and frequently reported microbes of the indoor environment include, but are not limited to, viruses, bacteria, mycoplasma, mold (fungi), yeast, protozoa, etc.
Released On: 6/26/2013
Views: 5969
In indoor environments, this fungus can be transported from outside or may propagate on building materials such as cellulose rich sheet rocks, etc. and can generally be isolated from floors, carpets, mattress dust, Heating Ventilation Air Conditi ...
Released On: 6/19/2013
Views: 10517